Pack of Fans be Quiet! Light Wings ARGB 120mm PWM
Pack of Fans be Quiet! Light Wings ARGB 120mm PWM
Out of stock
Comparte
Light Wings 120mm PWM offer impressive lighting with a unique vibrant look, solid performance, and quiet operation with efficient cooling.
- 3 fans included
- ARGB lighting on the front and rear
- Multiple colors and modes for an individual look thanks to 18 LEDs
- The ARGB Hub allows you to sync up to 6 ARGB components
- 7 noise-optimized fan blades for high airflow and low noise-generating turbulence
- Very quiet operation, with a max. of 20.6dB(A)
If you're looking for quiet case fans that look impressive from any angle you look at them, the Light Wings 120mm PWM are your ideal choice.
IMPRESSIVE LIGHTING
Multiple lighting possibilitiesLight Wings 120mm PWM offers ARGB lighting on the front and rear. The subtly illuminated ring at the back, combined with the glowing ring at the front, make for a gorgeous look from any viewing angle. 18 ARGB LEDs give you plenty of possibilities to individualize your computer.
THREE FANS, ONE HUB
Sync up to 6 Light Wings simultaneouslyAn ARGB Hub allows you to use and sync up to 6 ARGB components at the same time. With simple installation, this is a very easy and convenient process, and the ARGB Hub's sleek all-black design visually fits into any PC case. It can be mounted as a solid-state drive or anywhere else using the supplied double-coated adhesive tape.
THE PERFECT BOX FAN
Fins optimized for high airflowOptimized for maximum airflow, the Light Wings 120mm PWM is the ideal choice for any case setup that requires high cooling capacity. Its seven airflow-optimized fins not only reduce noise-generating turbulence, but also ensure the Light Wings 120mm PWM delivers the required performance even in highly demanding setups.
VERY QUIET OPERATION
The acclaimed low noise level of be quiet!A highly optimized fan cage and propeller achieve the quiet operation that be quiet! is famous for. With a noise level of just 20.6 dB(A) at full speed it proves that rather than being a replacement, the lighting is an added component for very quiet and very powerful operation. All the features combine to make the Light Wings 120mm PWM the perfect fan for quiet cabinets and gaming systems alike.
VARIABLE FAN SPEED FUNCTION
Adjust fan speed and associated noise level
Pulse Width Modulation (PWM) allows compatible 4-pin controllers, including those built into many motherboards, to intelligently vary fan speed and therefore noise level. With PWM, the system can increase cooling when necessary or run in maximum silence if preferred.
General data
Model | Light Wings 120mm PWM triple pack |
Measurements (mm) | 120 |
color selection | Black |
Lightning | RGB LEDs |
Fan speed @ 100% PWM / 12V (rpm) | 1700 |
Noise level @ 100% PWM / 12V ( dB(A) ) | 20.6 |
air flow @100% PWM / 12V ( CFM / m3/h) | 41.51 / 70.53 |
Air pressure @ 100% PWM / 12V (mmH2O) | 1.66 |
mechanical specifications
Measurements (L x W x H), (mm) | 120x120x25 |
Weight, incl. fixed cables (g) | 200 |
support technology | Rifle |
engine technology | 4-pole fan motor |
Fixing with tightening pins | - |
Screw fixing | ✓ |
Wires / Connectors
Daisy chain for signal lighting | ✓ |
lighting connector | 5V 3-pin ARGB |
connector | 4-pin PWM |
Wire length (mm) | 500 |
cable sleeve | - |
Performance / Noise
air flow @100% PWM / 12V ( CFM / m3/h) | 41.51 / 70.53 |
Air pressure @ 100% PWM / 12V (mmH2O) | 1.66 |
Noise level @ 100% PWM / 12V ( dB(A) ) | 20.6 |
Pot life @ 25 °C (hours) | 60,000 |
Electric specifications
DC rated voltage (V) | 12 |
DC operating voltage (V) | 5 - 13.2 |
Current consumption (A) | 0.07 |
Safety current (A) | 0.38 |
Input power (W) | 4.56 |
LED rated current (A) | 0.6 |
Accessories
3-pin to 4-pin 12V adapter | - |
12V to 7V adapter | - |
12V to 5V adapter | - |
Screws | 16 |
tightening pins | - |
silica gel washer | - |
Others | ARGB Hub |
Security certificate
certificates | EC /UL |
environmental directives
ROHS | - |
WEEE | ✓ |
triman | - |